Tractor Report

SPECIAL FEATURES

8+2 Speed Gear Box. Speeds available for all applications.

Brakes on Intermediate shafts resulting in no water ingress during puddling.

Recirculating Ball type Steering prevents transmission of shocks to the steering wheel.

Straight Rear Axle for easy maintenance and minimum wear & tear.

Epicyclic Reduction for High/Low Speeds-reduces noise & increases life.

Oil immersed Brakes for better braking due to larger braking area & longer life due to oil cooling.

HP Range Type No. of Cylinders Bore/Stroke Rated Speed Air Cleaner Fuel Pump Cooling System Clutch System Hyd. Pump Lifting Capacity Electrical Tyre Wheel Track Front Rear

60 Diesel, Four Stroke Direct Injection Four 97/110 mm 2200 RPM i) Oil Bath Type, with Cyclonic Pre-Cleaner ii) Dry Type (Optional) Inline, Make : Bosch India Water cooled i) Single/Dual ii) Main Clutch Disc Cerametallic (Optional) Gear Type 1800 kg at Lower Link Ends 12 Volts-88 Ah Battery Self Starter Motor & Alternator 7.50x16 14.9x28 1426-1940 mm 7.50x16 16.9x28 (Optional)

Measurement Length & Width Weight Height upto streering Min. Ground Clearance Min. turning Radius Weight No. of Splines P.T.O. Driver's Seat Transmission No. of Gear Speeds Steering Brake Type Brake Actuation PTO Speed

3630 mm 1820 mm 1680 mm 435 mm below R.T. Housing 3.5 m 2380 kg 21 1000 RPM Adjustable 8 Forward 2 Reverse i) Mechanical-Recirculating ball type ii) Hydrostatic Power Steering (Optional) i) Dry : Double disc type (190 mm dia) ii) Wet : Oil immersed multiple discs (Optional) Mechanical, independent right/left or combined 6 540 RPM (Dual Clutch)

Hydraulic (ADDC) : Two lever, automatic Draft and Position control with mix control. 1. Position Control : To pre-select and automatically maintain certain position or depth of the implement attached to three-point-linkage 2. Draft Control : To automatically raise and lower an attached implement as the draft or resistance of the implement increases or decreases. 3....