Regular Maintenance of the Sand Maker

Through the basic overall analysis, we can see that 80% of the mechanical failures are due to irregular timely maintenance or improper operation, that is why users shall do the maintenance work while improving the technical level of the operator to reduce the occurrence of the fault protection engineering construction smoothly. When automation equipment suddenly fails to work, does not work properly or there are disorders, it is necessary to search for fault diagnosis.

The sand maker should be the right amount of work up to 400 hours when adding grease to work until 2000 hours when it is necessary to open the spindle assembly cleaning. The order time of the work should be within 7200 hours if the new bearings must be replaced after a period of time. Open the rock crusher process is to observe the inner workings of the case in order to avoid danger. After the impeller being found, manufacturers need to remove abrasion timely replacement patch. Special attention should be paid, without the consent of the manufacturer, many processes are forbidden.

Transmission triangle tape taut size should be adjusted to ensure that the triangular tape should be grouped optional, then each group of its length should be long as much as possible. Periodically stop and open observation door to observe the impact of the sand making internal wear. The center of the feeding tube, cone hat, impeller, indecent liner circumference guard wear block should be timely replaced or repaired, replaceable wear block should be replaced at the same time, as well as the wear blocks of the same weight. The staff should be kept away from equipments. For more information, before the machine is being repaired, the system and equipments must be powered off.

Cooling Machine : http://www.hxjq-crushers.com/cooling-machine.html

portable mining equipment : http://www.ore-machine.com/portable-crusher.html

Rod Grinder : http://www.hxjq-crushers.com/ore-rod-mill.html