Chpater 10 Answers

CCNA Discovery

Introducing Routing and Switching in the Enterprise

Lab 9.3.4 Troubleshooting EIGRP Default Route Redistribution

[pic]

|Device |Host Name |Fast Ethernet 0/0 |Serial 0/0/0 |Serial 0/0/0|Serial0/0/1 |Enable |Enable, vty, and |

| | |IP Address |IP Address |Type |IP Address |Secret Password|Console Password |

|Router 2 |R2 |192.168.2.1/24 |172.30.1.2/30 |DTE |209.165.201.1/30 |class |cisco |

|ISP |ISP |NA |209.165.201.2/30 |DCE |NA |class |cisco |

|PC1 |H1 |192.168.1.2/24 | | | | | |

|PC2 |H2 |192.168.2.2/24 | | | | | |

|PC3 |H3 |NA | | | | | |

Objectives

• Configure EIGRP on routers.

• Discover connectivity issues and implement solutions to network errors.

• Examine the topology tables with the show ip eigrp topology command.

• Examine the statistics using the show ip eigrp traffic command.

• Examine routing tables using the show ip route command.

• Observe routing activity using the debug ip eigrp command.

Background / Preparation

In this lab, you will learn how to troubleshoot the routing protocol EIGRP using the network shown in the topology diagram. This lab uses an 1841 router and Cisco IOS commands. Any router that meets the interface requirements displayed...