The Precautions When Industrial Vacuum Cleaner Not Work

When the industrial vacuum cleaner stops its operation need to take care, there are many points to note, the machine is in need of protection, otherwise it will be void. Described in this article is that when the industrial vacuum cleaner should stop the job needs attention.

When the industrial vacuum cleaner stops running before, in addition to its thorough cleaning must, we must also pay attention to the following issues: long-shelved when not in use must pay attention to cleaning the fan, rust, etc., be sure to prevent dust and water from entering the bearing (note motor moisture). In industrial vacuum cleaner stops running, you should put the ash bucket fouling exclude clean. Drive section and cleaning agencies to fully infused oils. In the vacuum cleaner stopped working, be sure to regularly allowed to run for a short time (idling), this is to ensure the normal operation of dedusting system best maintenance method. Moisture condensation phenomenon often occurs in bags indoors, which is moisture gases (especially the combustion gases after cooling) caused so cool to be in the system before it is completely discharged gas moisture content, and to put on dry air .

If a host of industrial vacuum cleaners fever, a burning odor or abnormal vibration and noise, should be promptly repaired, not reluctantly use. Do not make the state machine is in working long hours, continuous working time please control within 2 hours, otherwise it will affect the life of the machine. Long-term use vacuum cleaner when the blockage due to dust compartment which results in suction decreases. In order to prevent suction drop, dust compartment should be regularly cleaned with water and a cloth bag, washed, dried in the shade and then use to restore suction.