Submitted by: Submitted by jangirvineet
Views: 177
Words: 699
Pages: 3
Category: Literature
Date Submitted: 08/24/2013 07:39 AM
2nd Semester SHRI RAMDEOBABA COLLEGE OF ENGINEERING & MANAGEMENT, NAGPUR Department of Mechanical Engineering
2012‐13
ENGINEERING DRAWING: PROBLEM SHEET ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Assignment No: - 1
Q1 A line AB is 75 mm long. Its Fv & TV make 450 and 600 inclinations with X‐Y line respectively. End A is 15 mm above Hp and VT is 20 mm below XY line. Draw projections; find inclinations with HP & VP. Also locate HT.
Q2 The projectors drawn from VT & end A of line AB are 40mm apart. End A is 15mm above Hp and 25 mm in front of VP. VT of line is 20 mm below Hp. If line is 75mm long, draw its projections; find inclinations with
HP & VP
Q3 One end of line AB is 10mm above Hp and other end is 100 mm in‐front of VP. Its Fv is 450 inclined to XY while its HT & VT are 45mm and 30 mm below XY respectively. Draw projections and find TL with its
inclinations with Hp & VP.
shortest is vertical. This fig. is TV of three rods OA, OB and OC whose ends A, B & C are on ground and end O is 100mm above ground. Draw their projections and find length of each along with their angles with ground. End A is 15 mm above Hp and its VT is 10 mm below Hp. Draw projections of line AB ,determine inclinations with HP & VP and locate HT, VT.
Q4.OA, OB & OC are three lines, 25mm, 45mm and 65mm long respectively. All equally inclined and the
Q5 The FV of line AB makes 450 angle with XY line and measures 60 mm. Line’s TV makes 300 with XY line.
Q6. An artificial satellite is orbiting around the Earth. The major axis of its orbit is 40,000 km and the minor
axis is 30,000km (Assume suitable scale). Draw the orbit (path) of the satellite using concentric circle method.
2nd Seme ester SHR RAMDEOBABA CO RI OLLEGE O ENGIN OF NEERING & MANAGEM MENT, NA...