Wet Ball Mill Lifting Process Precautions

Wet Ball Mill lifting process Precautions

Wet ball mill is a large power plant desulfurization using wet desulfurization equipment needs with one of the main limestone slurry preparation . The wet ball mill equipment with reliable operation , the system is stable , beneficiation planteconomical operation and other characteristics . This paper describes the process of lifting cylinder Caution wet ball mill , provide reference for the peer mill industry .

Wet Ball Mill lifting process considerations are as follows :

Autoclave Aerated Concrete block plant

1 , the mounting platform haul rail beam to take into account when wet ball mill cylinder placement point . Track beam axis must highlight the process floor to the outside wall 4 . Of the projecting portion of the length of the cylinder must be greater than 2/ 3 , so that the crane rail beam placed in a ball mill cylinder .

2 , haulage and rail beam welding mobile platform structure must firmly anchor set to be reasonable.

3 , Wet Ball Mill placed after hauling platform play with four 2 t hoist fixed to ensure safety on the haulage platform. Hauling process should pay attention to track beam deformation , settlement and other issues.

4 , Ball Mill hanging point set should be reasonable and should produce four special lug arranged on the cylinder, in order to meet the lifting process of lifting angle of not less than 45 degrees.

5 , lifting empty side of the floor beams floor openings should drill hole . Pore ​​size of about 100mm. On both sides of the opening of a close承力梁. Tied with rope after living through holes 10 tons hanging chain hoists . Thick with a diameter greater than 200 steel and wood placed on the side of the concrete beams , concrete beams to protect the rope from damage to water http://www.yfballmill.com/Autoclave-Aerated-Concrete-(AAC)%20Production-Line.html"chestnut .

6, the lifting cylinder displacement process wet ball mill to ensure that the level of the cylinder , causing the tilt...