Which Part of Cone Crusher Decide Its Highest Efficiency

Cone crusher is mainly composed of frame, fixed cone assembly, moving cone assembly, spring mechanism, bowl type pedestal and transmission parts. Other auxiliary part cone crusher by electrical system, thin oil lubrication system, as well as hydraulic chamber system. But do you know which part can decide the cone crusher's highest efficiency?

Incorrect feeding: feed material to cause uneven cloth feeding mouth side.Cloth uneven consequences: a. lower production capacity;B. order size is too large;C. shift of the adjusting ring is too big;D. maximum bearing pressure;E. consumption is the largest.

The right way to feed in the crusher are combined with points, the feeding box will help ensure after fully mixing of the material along the entire broken cavity evenly distributed. Try to keep the fine and coarse material segregation in the smallest degree, in order to minimize liner wear. Both short head type and standard of the crusher, it is better to adopt advance screening, screening to feeding in thin and viscous material. This will avoid material blockage, adjusting ring movement as well as lower production efficiency. A metal detector, is also should be installed in order to get rid of the metal objects by adjusting ring shift.It is very important to control into the crusher feed speed. Distance from a high to the material almost inside the crusher can all through the open side of the crushing cavity.Without crushing directly into the crushing chamber at the bottom of the material will cause abnormal pulse adjusting ring, thus result in serious damage to the main frame in the adjusting ring interface.If the material is fall into more than 36 'or bigger crushing cavity, must adopt trapezoid blanking, corner much material or similar reduction gear.

Whether the cone crusher can obtain the highest efficiency or not, directly depends on the feed configuration. If the feeding amount, the material evenly covered with broken cavity, crusher can achieve maximum...