What Need to Care of Spiral Classifier Before Operation

The correct operation of the mining machine, which not only make them obtain the biggest efficiency , but also prolong the lifetime of them. So is the spiral classifier. But do you know what should we care of the spiral classifier before opration? If you really do not know about it, today we will talk about something about it. So I consider that you may read this article.

(a) operating conditions of spiral classifier is as follows:

1, any parts of the oil is not allowed to fall in the classifier slot.

2, each bearing and gear reducer lubrication condition is good, not easy to go place should with tubing convenient place to go.

3, the feeding mouth must install metal mesh to prevent the ball into the.

4, couplings, belts, open gear must have a solid and reliable protective cover, sensitive and reliable electrical devices.

(b) check before driving, driving order and note

1, equipment inspection shall be the responsibility of the operating workers, found that the problem handled in time, major issues should be submitted to the relevant leaders rear can handle and in running record in detail;

2, inspection area and content: (1) the lubrication system: check reducer oil and adequacy of open gear grease. Check the bearing oiling device for oil. (2) the various parts of the body: check loose screws and key ministries; Check the belt tightness; Check whether the spiral blade is loose, whether to wear too much. (3) electrical device: check the electric switch and the limit switches are in good condition.

3, after check the spiral separator (http://www.chinaquarry.com/products_show/pro30.html) and contact before and after the post, before startup sequence is as follows: (1) cut into the power supply, press the start button; (2) pay attention to the presence of abnormal change; (3) the switch on the watergate. 4, it is strictly prohibited to spiral vane was buried ore, such as being buried, use lifting device will spiral part; Position starts...