What Should Notice When You Use Shaking Table?

As a matter of fact, the shaking table is also known as jerking table. That is to say the jerking table and shaking table are the same products. Advanced equipment and scientific operation is equal to the enterprise benefit. Stroke, speed, bed surface slope, volume of feed and feed concentration flush the organic coordination interaction is directly affect the separation effect of the key technologies.In practice to combine different mineral characteristics of high-speed equipment to best, avoid blind and effect.Listed in the table stand for the preferred reference value is used for debugging.

What we need to pay attention to jerking table is as follows:

1. the stroke control: stroke adjusting handwheel clockwise rotation, adjust the slider to rise, narrow stroke;Counterclockwise rotation, adjust the slider to drop, increase stroke.The adjustment of stroke is determined, will be a fixed bolt tightening at the bottom of the stroke the handwheel.In the adjustment of stroke, it must be at the same time for the spring adjustment bolt at the back of the transmission case accordingly.Otherwise due to the parts too loose or too tight will be attaint parts.

2, stroke and speed matching principle: large stroke with small flush times, small stroke with use.Processing of coarse grained ores, the bed layer thick, needs to have larger stroke and smaller at times.Treatment of fine grained and slime requirements, on the other hand.

3, the relation between the bed surface transverse slope and flush.Increasing the transverse slope and flush all can increase the lateral movement speed of ore grain, but increase the flush can also enhance the selective separation effect.General roughing or scavenging effect using 'slopes low water', select, adopt 'small slope the waters'.

4, feed concentration of jerking table (http://www.chinaquarry.com/products_show/shaking_table.html), feed size and capacity. The feeding volume affect velocity on the surface of the pulp in the...