Ball Mills Are Widely Used in Many Fields

After reach and study, when ball mill has the problems such as overheat of worm wheel and worm gear, bearing damage, excessive abrasion, we need to replace and repair ball mill in time. We need to change the bearing of ball mill, remove the impurity inside ball mill and change lubricating oil, change worm wheel and worm gear of ball mill. When the driving device of ball mill goes loose, or worm wheel wears out or bearing of ball mill wears out or screws become loose, we can cool ball mill trough fixing the driving device of ball mill, changing worm wheel of ball mill, changing bearing, tighten screws of ball mill, remove impurity. When ball mill goes overloaded, lubricant oil is too much or too little, we should adjust ball mill to the appropriate load or choose ball mill of larger size and add lubricant oil in driving device of ball mill. When the output shaft and the driving device of ball mil join badly, we should adjust the output shaft of ball mill to suitable position to fit the driving device of ball mil, so as to eliminate the noise of ball mill. Besides the above-mentioned approaches, we can also get solutions to cool ball mill.The major function of ball mill lining board is to protect the cylinder of ball mill from the direct clashing and friction of grinding media and material inside ball mill. Meanwhile, the ball mill lining board with different shape could be used to adjust the moving pattern of grinding media inside ball mill to strengthen the grinding effect of grinding media to material and increase the grinding efficiency of ball mill and output of ball mill. With the number of ball mill manufacturer’s increasing, the requirement of ball mill by customers becomes more and more strict. The material of ball mill lining board is changed into medium alloy steel from former high manganese steel. To fit the ever-changing market, our cement ball mill adopt medium alloy steel of high quality as material to make ball mill lining board. Henan Hongxing...