Know Some Basic Knowledge of Hammer Crusher

In the resources integration process, the equipment with low production capacity and backward technology will be phased out and eliminated, which requires the crusher equipment to have higher quality. Traditional crusher machines such as jaw crusher andimpact crusher cannot satisfy the development needs of the building material industry which needs two-stage crushing flow. The new type of hammer crusher independently designed and innovated by Henan Fote Mining Machinery Co., Ltd. has such features of big crushing ratio, high efficiency, energy conservation and environment protection, so that it gradually replaces traditional crushing equipment.Here is a basic introduction of hammer crusher.The gap between the hammers and the grate bars of the hammer mill crusher can be adjusted through the two eccentric gears on the bottom of the grate bars according to the requirement of the crushing granularity. The gap adjustment requirement: when the crushing granularity is 5mm, the gap between the hammers and the grate bars can be adjusted to 10~15mm; when the crushing granularity is 10mm, the gap can be adjusted to 15~25mm. The gap between the grate bars can be adjusted through the number of the gaskets according to the need of the crushing granularity. If the bearing pedestal adopts thin oil lubrication, after eight hours, add lubricating grease in the bearings. The height of the oil level must be maintained at the center position of the lowest balls and the lubricating grease must be changed every three months. If dry oil lubrication is adopted, screw the gland of the dry oil cup for 2~3 times every shift and add a certain amount of dry oil and the bearings must be cleaned every half year.combination stone crusher: http://www.chinafote.com/pro/p9.html