How to Use in the Low Temperature Crushing Machine

Jaw crusher, impact crusher, cone crusher, impact crusher, to enable them to still can not work at minus 50 degrees celsius. Because of relatively low winter temperatures, will not only reduce the crushing machine service life greatly, more easy to break the oil and water in the frozen, so in the winter before the best of crusher do thorough inspection, maintenance, ensure project safety of machinery for the winter, when the machine to avoid problems caused by the impact on production. The matters needing attention in winter maintenance crusher are as follows:

Crusher cleaner

Diesel engine, chassis, equipment cleaning engineering machinery appearance can play the role of cleaning detergent, the cleaning process can also be found in the device, component damage and leakage site, do the preliminary work for the next step of repair and maintenance. Prohibit the use of high temperature and high pressure water gun to flush the water requirements of high position, especially electrical parts, so as not to cause damage.

And the replacement of the oil

1 Selection of fuel oil. Diesel oil in low temperature easy to wax, viscosity, liquidity, poor atomization, the combustion process of deterioration, reduce the power and economy of diesel engine. In order to make the engine work soft, reduce fuel consumption, should choose low freezing point diesel.

2 The replacement of diesel engine. Diesel engine oil with low viscosity should be smaller. Try to choose high performance engine oil, the oil is not only at high temperature is not easy to be oxidized, but does not leave the sediment in precision parts of diesel engine, can greatly extend the life of the diesel engine. Multi grade engine oil can work in the temperature range of slime drying machine within a broad, general optional for multistage oil viscosity grade. Changing engine oil and oil filter should be replaced or cleaned.

3 replace the lubricating oil and grease. Change garments according to the maintenance,...