Introduction to the Unique System of Cone Crushers

The cone crusher in the course of their work, pay attention to uniform feeding, feeding inequality appears to lower production capacity, product size is too large, the bearing pressure, power consumption and rising. Cone break to have in addition to iron device to prevent the crushing chamber over the iron, if frequent iron, it may be caused by a broken shaft accident. Now available in the market cone crusher general powder standard, short head type and other specifications, standard cone break more than for open-loop, the short head cone crusher is used for closed loop. Lining as an important component of cone crusher, to choose is also very important in choosing a liner, users generally pay attention to three factors: yield, power consumption and liner wear. User to select the liner according to the maximum feed size of the device, the particle size, size distribution, material hardness, wear resistance of materials to consider.The spring safety system of crusher acts as an overloading protection system that allows metal to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (SDY) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.The China Fote Machinery high chromium cast iron cone crusher advantages: First, the broken wall wear resistance greatly improve the wear resistance of the high manganese steel crushing wall about five times, not only long life and low user costs; second, to achieveimprove the physical structure of the broken wall of the impact resistance of high chromium white anti-wear cast iron, sustained release high-chromium white anti-wear cast iron broken wall by the impact force to...