Introduction to Operating Parameters of the Cooling Machine

The cooling machine is also known as the rotary drum cooler, which can support the rotary kiln to form a complete production system. In the actual production process, the cooling machine is mainly used to cool the materials with a certain temperature and particle size by supporting the dryer machine, which can greatly improve the cooling rate, reduce labor intensity and improve production as well as further removing part of the water and reducing the grain temperature of materials. The operating parameters of the cooling machine:In actual production, each device is not isolated, the operation between cooler and kiln is mutual restraint and influenced. The analysis must be based on the specific circumstances. Usually its main parameters are:1. Material thickness is uniform, it is possible to generate the same gas flow resistance, the gas can be uniformly distributed throughout the material layer. This is the basic condition for the normal operation of the cooling machine.2. High-pressure air flow in the cooler section, the air pressure of the cooling air is high, the air volume is not great, its exhaust gas as secondary air into the kiln. The air volume is conducive to the clinker cooling, but can also cause secondary low air temperature, while kiln fly ash will be relatively large.At the same time, the rotary drum cooler can be also used for the cooling of other powdered and granular materials. The cooling machine is the main configuration device of the rotary kiln production system. It has the advantages of simple structure and stable performance. The exhaust gas can be introduced into rotary kiln after the heat exchange, thus improving the thermal efficiency of the entire system.iron ore processing line manufacturer: http://www.ftm-ore-beneficiation.com/pro/ore_beneficiation_plant.html