Do You Know the Maintenance Methods of Flotation Cell

Flotation cell is suitable for separating nonferrous metal and black metal, and non-metal such as, coal, fluorite, talc, etc. The motor of the flotation separator drives impellers to rotate, and generate centrifugal effect to form the negative pressure, so on one hand, the flotation separator can inhale sufficient air to mix with slurry, on the other hand it can stir the slurry to mix with drug, while refine foam. So, mineral material can stick on the foam, and it will be the mineralized bubble after floating to the pulp surface. Adjusting the height of shutter and controlling the liquid surface can help to scrape useful foam.The maintenance method of the machine：(1)As well as the other machines, flotation machine"s working ability and duration are determined by the maintenance and the proper functioning of main part. All the working part should be carefully examined every 3-4 months. And a new flotation machine should be always checked in the first few months;(2)Only the skilled personnel can be allowed to check.(3) In order to timely replace wearing parts and reduce stop calculation, we must always reserve a full set of wearing parts in the warehouse. Determine the date and reserves of wearing parts according to the specific circumstances to.(4)Guarantee the flotation machine operator is under technical guidance and training, and strive to fully familiar with the machine.(5) In order to avoid the useless and the dirt mixed with oil, a grease filter is necessary. When the flotation machine is working, oil cover should be sealed.(6)Before set a machine in operation, a thorough examination is prerequisite.The upper and lower process must be contacted before starting.(7)Operation sequence is: press strobe switch, and the start button.(8)No hand-touching after rotating.sf flotation machine: http://www.chinafote.com/pro/p21.html