How the Process of Soilds Control Equipment Removal?

With much more information about soilds control equipment, pay a visit at www.shale-shakers.com where you can buy it with high satisfaction.Many work-over rigs,which occasionally do some drilling fluids still do not employ solid removal equipment which seems to work satisfactorily,it is only as long as drilling is confined to short intervals. Drilling without removing solids, the circulating system will contain a constant volume of slid phase.. The soilds control equipment from drilling mud will increase the mud weight. Many problems will arise, if Many drilling solids are allowed to remain in the drilling mud. These effects do not immediately appear after the drilling solids concentrations reach excessive levels. That is why many drillers accustomed to drilling shallow wells with unlighted drilling mud. Experience has shown them otherwise. Therefore, it is beneficial to take the detrimental effects of drilling solids seriously and remove them from the drilling mud.

However,the primary and the first stage equipment is a oilfield shale shaker which can do a solids removal above 75 microns and usually combine with other solid control equipment. The second and third stage equipment are desander that removes cuttings of 45-75 microns and desilter which do a separation between 15~45 microns. The desander and desliter can be work together to be served as a mud cleaner. Then, the last stage is decanter centrifuge which can remove the particles above 2 microns. After these steps, the drilling solids will be removed and the recycle and reuse of drilling mud can be achieved. With much more information about soilds control equipment, pay a visit at www.shale-shakers.com where you can buy it with high satisfaction.

KOSUN is the first group of manufacturers of drilling fluids solids control equipment,and an expert in drilling waste treatment.It is the forerunner of solids control equipment in China, which is specialized in decanter centrifuge,shale...