Submitted by: Submitted by Jonesto001
Views: 51
Words: 1826
Pages: 8
Category: Literature
Date Submitted: 10/14/2014 02:12 AM
PT Activity 4.3.3: Configure VTP
Topology Diagram
Learning Objectives
• • • • • • • • Investigate the current configuration. Configure S1 as VTP server. Configure S2 and S3 as VTP clients. Configure VLANs on S1. Configure trunks on S1, S2, and S3. Verify VTP status on S1, S2, and S3. Assign VLANs to ports on S2 and S3. Verify VLAN implementation and test connectivity
Introduction
In this activity, you will practice configuring VTP. When Packet Tracer first opens, the switches already contain a partial configuration. The user EXEC password is cisco and the privileged EXEC password is class.
Task 1: Investigate the Current Configuration
Step 1. Verify the current running configuration on the switches. What configurations are already present on the switches? ____________________________________________________________________________________
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 6
CCNA Exploration LAN Switching and Wireless: VTP
PT Activity 4.3.3: Configure VTP
____________________________________________________________________________________ ____________________________________________________________________________________ Step 2. Display the current VLANs on each switch. Are there any VLANs present? Are the VLANs user created VLANs or default VLANs? ____________________________________________________________________________________ S1#show vlan brief VLAN Name Status Ports ---- ------------------------ --------- ----------------------------1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 Fa0/5, Fa0/6, Fa0/7, Fa0/8 Fa0/9, Fa0/10, Fa0/11, Fa0/12 Fa0/13, Fa0/14, Fa0/15, Fa0/16 Fa0/17, Fa0/18, Fa0/19, Fa0/20 Fa0/21, Fa0/22, Fa0/23, Fa0/24 Gig1/1, Gig1/2 1002 fddi-default active 1003 token-ring-default active 1004 fddinet-default active 1005 trnet-default active Completion should be at 0% at the end of this Task.
Task 2: Configure S1 as VTP Server...