Working Principles of Raymond Mill

Vipeak heavy industry has jaw crushr,impact crusher,cone crusher,cement crusher,ball mill,raymond mill,sand making machine,sand washing machine,if you are interested in our machine,please contact us without hesitation.

When ramond mill working ,the materials will be delivered into the machine body by the feeding hopper installed on the sidewall of the cover shell.Abiding by the roller equipments swung on the star rack of the main machine body,it will make the revolution movement by surrounding the vertical axis and make the autorotation movement at the same time .Due to the centrifugal force ,the roller will swing outside and give much pressure on the gringing ring so that the shovel can deliver the materials to the space between the roller and ring,thus achieving the crushing aims.

Wind classifying process of raymond mill : After the grinding ,the wind machine will blow the wind to the main units shell and blow up the powder to the analyzer positioned upon the grinding room to receive the classifying .While the materials with over-coarse degree will fall down to the grinding room to receive the repeated grinding .And the standard particles will flow to the cyclone collector along with the wind stream and then be discharged out by the discharging gape at the form of final products. And the wind stream will return the wind machine by the return air positioned on the upper end of the large cyclone collector .And the air course is circular and can flow at the negative condition. And the wind increasment of the circular wind path will be discharged out by the waste air pipe between the wind machine and main units. And then it will enter the small cyclone collector and proceed the purifying processing.