Do You Know the Common Faults of Concrete Mixer

JS series of concrete mixer adopts the double horizontal shaft forced type. The machine can stir dry, plasticity Reversing drum concrete mixer, liquidity and lightweight aggregate concrete and all kinds of grout and mortar, it is a kind of high efficiency models low cost concrete batching plant, commonly used in a variety of big, middle and small prefabricated components factory and road bridge, water conservancy and wharf and civil engineering. The flowing is the common faults and solving methods.

Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:diesel concrete mixers for sale,diesel Concrete Mixer,concrete mixer pump,etc. We will provide you with the best product and service.

The stirring shaft stops working: Stop working or slow rotation of the stirring shaft. The reason is that: The serious overload. The motor belt is too loose. Abnormal sound in mixing cylinder: The mixing cylinder produces the shrill abnormal sound, usually caused that the foreign objects between the mixing blades or side of the blade and the inner wall of the tank have friction with the inner wall of the tank. The existence of the foreign objects will increase the stirring friction. This will make the stirring shaft to go into the sluggish operation. At this time, you need to stop working to remove the foreign objects, and then adjust the interval between the blade or the scraper blade and the inner wall of the tank according to the requirements of regulation,

Reducer with high temperature is usually due to the bearing load increases, the violent friction and a great quantity of heat. The main reason is that the oil viscosity is too high or too low. The high temperature in the two shafts ends of the mixing tank is generally caused by the friction of the shaft end. High temperature in the shaft end is caused by the bearing...