Double Roller Crusher Be Installed in Addition to Iron Equipment

A heavy-duty Flender gearbox with 22kW flange mounted motor is used for 4mm thick feed size. For thicker plates this may change.Material is fed into the Crusher by hand via the built-in inlet chute. This ensures that material is presented to the rolls at the correct angle and feed rate. Inlet width is 900mm. Roll size is 380mm diameter by 940mm diameter. Gasket device adjusts the granularity by decreasing and increasing the gasket numbers or thickness. When the gasket number increases, the gap of two rollers and granularity become bigger, on the other hand, the gap and granulariyt become smaller.Firstly, double roller crusher should be installed in addition to iron equipment; in order to strengthen the work to iron ore, non-broken (containing solder prime matter) out of people to be damaged when the rolls crusher, resulting in parking accident. Secondly, viscous material is easy to plug the broken space jam when handling failure to stop treatment, can not be stabbed mine in operation; Then when the material handling chunk containing more, pay attention to large pieces of ore from the crushing space easily squeezed out, to prevent injury or damage to equipment;Scientific management, advanced processing technology and innovative manufacturing theory make Hongxing Machinery become the exporting base of crusher machine, construction waste recycling plant and famous grinding equipment in China. Interested in our products? Send us an email into sinohxjq@hxjq.com for more details?Normally, the surface of the rollers is not a cylinder and it will be a concave profile with both ends large and the middle small when the roller of the roll crusher worn out. At this time, large size clay pieces or mud group may go out through the notch without crushing, so the rollers need repairing. In addition, there are also other methods to repair the rollers such as the method of repairing after removal. We believe that methods will be more and more after our deeply...