How to Check the Oilfield Drilling Mud Decanter Centrifuge Run?

a pressure, temperature and separation of Oilfield Drilling Mud Decanter Centrifuge performance is in a steady state;differentials of Oilfield Drilling Mud Decanter Centrifuge for leakage;

.

Vibration whether the increase (if the increase in the need to identify the reasons);

the seal is good. If Decanter Centrifuge is not a normal phenomenon, please refer to Chapter 7 ;

e. the main and auxiliary motor operating current of Decanter Centrifuge is normal, whether the current volatility.

a.In order to ensure a smooth feed without impact, raw liquid cliometric pump (such as single-screw) direct feeding, and uses the frequency adjustment, according to the separation requirements of Drilling Mud Cleaner, process requirements and adjust the feed rate to achieve automatic control.

b. machine feeding tube before the valve must be no leakage, the general gate or globe valves.

c. Drilling Mud Centrifuge washing lines must be set so that each stop or turn on the internal washing machine, ensuring a smooth and normal use centrifuge start. In order to achieve self-cleaning, requires the installation of a solenoid valve.

b.d. When the liquid drain pipe installation to ensure smooth flow. Do not allow the liquid pipeline climbing installation, to prevent poor drainage or intrusion phenomenon.

Centrifuges feeding tube, the tube connecting the mouth and tapping the pipe system must be flexible connection, will never allow the use of rigid connection, in order to avoid structural deformation Decanter Centrifuge and piping system resonance.

http://shale-shakers.com/solids-control-equipment/mud-cleaner.html

e. the recording conditions when grading or separation of materials, when changing conditions or grade separation material effect is not ideal, referring to treatment failure and treated accordingly.

a front stop, close the inlet valve, which Oilfield Mud Conditioner leads to the optimum temperature for water or cleaning solution to wash, rinse time...