How to Correct Disassembly Sand Making Machine

Sand for its simple structure and is widely used in the industry, but Sand overhaul work from time to time, for the demolition of Sand, Sand users as you know how much? Sand machinery for the removal procedure made the following detailed description:

Sand making machine finished after making cleaning and sweeping work, you need the following order demolition Sand overhaul.

1. Remove the buffer spring, apart from the hanger rod movable jaw plate, remove the rod and the support plate from the rack holes, remove the crankshaft pulley and flywheel from the end of the journal. Remove the cover from the shaft seal and the outer ring gear oil, split seat slipped and removed from the rack slot wedge adjustment. Unscrew the nut and remove the screws. Loosen and remove the upper and lower side of the wedge. Remove the mounting plate from the broken frame.

2. Remove from the Sand making machine base with movable jaw parts of the eccentric shaft, remove the components in the following order. Loosen and remove the board from the movable jaw crushing activities board. Unscrew the nut position, and remove from the shaft equipped with tapered roller bearing sleeve Lord, unscrew the adjusting nut and remove the sleeve from the inner cone of rolling bearings. Remove the ring gear oil, seal disc and seal ring from the spindle neck. Loosen and remove the roller bearing seal jaw closure activities cover together with the gasket, remove the oil ring gear and hit the shaft with rolling bearing from the movable jaw plate. When the rolling bearing is defective, it should be pressed from the shaft.

After disassembly for cleaning work, then check with the Department of parts, measuring shaft and surrounded by parts, to see whether they are consistent with the size of paper sizes.

These are the removal procedure Sand when performing overhaul. Henan is the leading manufacturer of sand making equipment, has a wealth of technical experience, if you are interested Sand making machine,you...