Stabilized Soil Mixing Station Site Layout

The equipment can be arranged according to the actual situation of the construction site. But in front of the installation, the site should be flat and intact, and compacted, also by release of the sample position (sample should be reserved to the equipment installation is complete), well in advance of each component of the supporting foundation, the mixture to storage bin and the powder feeding system of concrete pier to leave a good foundation bolt of secondary grouting hole. But at the same time to pay attention to the following issues:Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:diesel cement mixers (for sale),concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. (1) the foundation of the installation of the equipment shall be selected in the open place, so as to shorten the feeding period of the loading machine. At the same time, also can ensure the finished material transport vehicle U-turn convenience planetary concrete mixer for sale, good and do not interfere with each other. (2) when the foundation is made, it shall ensure that the level of formation and the size of the ground shall be required to make the equipment installed and reasonable. Because the foundation quality will affect the normal work and the quality of the use of the equipment. (3) on the grounds of the size of the ground, the piling up of the raw material and the configuration of the loading machine, the feeding side of the batching unit is determined. (4) for the convenience of the loading machine, the feeding side of the feeding unit shall be arranged on the feeding slope pier, and the mixing unit shall retain a free access to the inspection passage to facilitate the inspection mobile block machine, maintenance and maintenance of the equipment and operation. At the same time small mobile brick...