Maintenance of the Stabilized Soil Mixing Station

1. Speed reducer (device) and electric drum by executing the corresponding provisions in the instructions for use.Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:egg laying block machine,concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. 2. Agitator, feeding conveyer, belt feeding machine, the batching machine, screw conveyor bearings, every boot before the application of grease gun to the oil cup grease 5 - 8, 200 hours of work each opened to check, for the new grease. 3. Mixer gear should be applied before starting a little butter every day. 4. Each week open once the transmission chain cover cement mixing plant, and painted a small amount of grease on the chain, and every 300 hours cleaning chain. 5. The weekly cleaning belt and belt feeder tensioning screw once, and coated with new grease. 6. The mixer working condition is bad, when the blade is worn to the area of less than the original 2 / 3 ready mix concrete plants for sale, replace the blade. 7. After the end of each class, mixed material storage bin discharging the materials clean, cut off the power supply; turn on the blender on the cover SICOMA concrete mixer, check the stirring arm and blade fastening and found loose the nut should be tightened immediately, lest blade shedding accident; cleaning or removal of equipment throughout the adhesion material, in order to avoid binding material hardening and equipment affect normal use. 8. Reducer or electric drum when there is leakage phenomenon, it is necessary to timely replacement gasket or sealing ring, to ensure the adequate amount of oil. Cover 9. Mixer on the cylinder after damage should be repaired in time, lest material flying away.