How to Properly Maintain the Soil Mixing Station Host

How to properly maintain the stability of soil mixing station host --- also pay attention to the following points:Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:mobile concrete mixer,concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. (1) in the daily work process diesel concrete mixer, must be a regular manual air storage device, that is, with a slight pressure, the dust bag open, unloading the accumulation of dust. (2) unscrew the butterfly nut and gently remove the filter, clean paper filter should be patted striking end, so that the dust off and is best to use compressed air or pump from the inner cavity of the filter element out blowing cleaning (Note: don't make air nozzle is too close to the filter) planetary concrete mixer, to get rid of adhesion in the filter surface dust, effectively prevent the dust spilled into the inner surface of the filter, for long-term in the more humid area of the engine, air filter is easy to damp and dust covered, breathable sexual difference, the influence of intake amount and in filter cleaning before should first use lighting to dry the filter, and then cleaning, to prevent damage to the filter. (3) filter after a number of cleaning, open joints cracking, filter shell deformation, assembly after sealing, at both ends of filter element sealing rubber ring and between the shell is not sealed, core bracket deformation and improper assembly China planetary concrete mixer, intake pipe interface is not sealed. These problems may be due to short circuit of the air inlet, so in the maintenance should be to ensure the normal state of the various parts, timely replacement of dressing aging, deformation, breakage and parts, filter butterfly nut tightening force should be appropriate, not too tight, to avoid damaging the filter. (4) the safety...