Jzm Concrete Mixer Site Installation Notes

1, place field horizontal finishing, dig a 1.3 meters long, 1.4 meters wide, 1 meter deep pit, the cross-sectional shape as shown in the figure. Pit is higher than the floor, to prevent the flow of water into the pit. The pit with a brick masonry DMP planetary mixer manufacturer, and mortar surface, prevent Water Leakage.Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:ready mix concrete plants for sale,concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. 2, mobile machine, using material frame alignment pit, dismantling traction frame, the feeding frame connected long track turn into the pit, connection screw, observed after long track position is appropriate, when necessary, appropriate to adjust the machine's position. 3 and put four supporting legs, supporting feet should cushion block, will frame adjusted to the horizontal position, to enhance machine stability and reduce the axial movement of the stirring barrel. In the use of fixed operation area, will set up the machine available sleepers (tire unloading), then adjust the level of machine. (Note: the axis of the mixing barrel is not higher than the feeding end) 4, with the wood of the colon rail pad, to prevent the deformation of the track during work. 5 concrete mixer manufacturer, JZM series concrete mixer automation is relatively high Mobile Hollow Brick Making Machine, electrical components, to prevent damp for electrical components and prolong the service life of the machine, machine installation must ride canopy.