The Cause of the Failure of the New Concrete Mixing Station

What is the cause of the failure of the new concrete mixing station? Some customers in new concrete mixing station just began to put into use when will the unexpected problems, attracted them very confused, will think it is not because of the bad quality of the machine, or how to return a responsibility SICOMA concrete twin shaft mixer, concrete mixing station staff summed up the concrete mixing station purchase a new daily may there are mainly five aspects: wear speed, poor lubrication, loosening, leakage phenomenon, operational errors. Specific reasons are as follows:Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:mobile block machine,concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. Because of the rough surface of the new concrete mixing station concrete batching plant, the influence of the new machine parts processing, assembly and adjustment and other factors, the friction surface is rough, the surface contact area is small, the surface of the pressure state is uneven. Machine in the process of operation, parts of the surface of the concave and convex parts of the friction, wear down the metal debris, but also as an abrasive, continued to participate in the friction, but also accelerated the wear of parts with the surface. Therefore, in the period of time to easily cause parts (especially with the surface) of the wear and tear concrete mixer equipment, wear and tear. At this time, if the overload operation, it may lead to the failure of parts, the occurrence of early failure. Such as: mixing station host blade