Seed Dehuller Manufacture and Industry

As a professional SEED DEHULLER manufacturer, we can also provide considerate solutions for your seed dehuller operation attentions. Now we will introduce the operating attentions before seed dehuller starting.

1. Connect the 380V power supply before seed dehuller operation, then start the motor, and check whether the revolving direction keeps unanimous with the indicating arrow. If they are not unanimous, we can exchange the two splices at will, then they will become unanimous with the indicating arrow.

2. The soybean that will be peeled should not be too dry, if not, they will be easily broken. The moisture content should keep about 9%, or the broken rate will increase. In this case, we can damp the soybean s with water first. In winter, it needs about 4 hours for dampening and two hours in spring. Then the soybean can be processed by the seed dehuller. This is quite important in seed dehuller operation attentions.

3. Before processing, we should separate the soybean s by different species and granules. Then we use suitable size of screens, which can improve production efficiency and reduce broken rate.

4. After trial run of the seed dehuller, if each part of the machine runs normally and without any noise, then we can begin the production.

Before the seed dehuller starting, we can pay attention to the operation attentions above, and ensure the seed dehuller has safe running. This is what we should notice in seed dehuller operation attentions.

Seed dehuller industry, as one of the main processing industries, has been developing rapidly these years. Seed dehuller industry development promotes domestic processing industry to develop. But there are also some problems in seed dehuller industry and we need to find solutions for these problems.

First of all, domestic seed dehuller industry lags in technology and has higher processing cost. Compared with foreign advanced technology, we still have many shortcomings. And the seed dehuller...