About the Belt Type Concrete Batching Machine

Belt batching type: the structure is more than the upper part of the raw material storage hopper, the lower part of the measuring bucket, the bottom of the unloading conveyor belt SICOMA MPC planetary mixers, the storage hopper for the storage of raw materials, the bottom of the storage hopper is the ingredients of the conveyor belt. Its principle: ingredients, belt machine starting with the raw material to the set point in the hopper to set the value of the belt stop, and then under the control of instrument control, in order to complete the configuration of the material hot sale concrete batching plant, instrument control to start unloading belt material into the next part (such as mixing machine to enhance bucket or conveyor belt, etc.. Belt type for medium and small construction site, because of its small base material such as PL800 with 500Kg sand, by less than 2% error diesel engine powered concrete mixer, error absolute value at 0 ~ 20Kg, so as to further improve the batching accuracy and reduce the error value but does not affect the efficiency of distribution, can be used with low speed cutting and quick unloading way. Error can be controlled within 0 ~ 5Kg. Using this type of machine to reduce procurement costs, and more hope that the use of batching machine measurement of bulk cement, cement silo through cement screw conveyor will be used, because the cement flow is good, will cause a small amount of cement leakage, and the transmission belt gap has a small amount of cement, such as non use this way you must use the trough belt roller, and bucket mouth edge with soft thin side, square can control cement spillover.