Submitted by: Submitted by marckii
Views: 10
Words: 7995
Pages: 32
Category: Other Topics
Date Submitted: 03/17/2016 08:43 AM
Only the Danish version is authentic
Notice D II-1 B-1
1 November 2004
Technical regulation on the
construction and equipment, etc. of
passenger ships on domestic voyages
CHAPTER II-1 B
Construction – subdivision and stability,
machinery and electrical installations
Regulation 25-1 Application ..................................................................2
Regulation 25-2 Definitions ...................................................................2
Regulation 25-3 – General provisions .......................................................6
Regulation 25-5 – Model test method......................................................10
Annex 1. Indicative guidelines to national administrations.....................14
Chapter D II-1 B-1
CHAPTER II-1 B
Construction – subdivision and stability,
machinery and electrical installations
Part B-1
Specific stability requirements for ro-ro passenger
ships
Regulation 25-1
1
Application
This part shall apply to the following ro-ro passenger ships
operating to and from a port of an EU member State on a
regular service, regardless of their flag, when engaged on
domestic voyages:
1
2
2
New ro-ro passenger ships of classes A, B and C shall
comply wit the specific stability requirements of this part.
Existing ro-ro passenger ships of classes A, B and C shall
comply with the specific stability requirements of this
part no later than on 1 October 2010, unless they are
phased out on that date or on a later date on which they
reach the age of 30 years but in any case not later than 1
October 2015.
High-speed passenger craft as defined in regulation I/2.7 shall
not be required to comply with the provisions of this part,
provided that they have been surveyed and certified in
accordance with the provisions of regulation I/4.4.
Regulation 25-2
1
Definitions
For the purposes of this part, the following definitions shall
apply:
.1
“New ship” means a ship the...