Corn Thresher Main Structure and Features

The main structure of the corn thresher has stander frame,feeding hole,rollers,discharging hole and so on.when maize goes into the machine,the rollers rotates,friction, Extrusion and propulsion to remove the kernels from the corn cob,because the roller is made of rubber, the kernels will not be broken,this type is just single threshing machine,do you want a combination corn peeler thresher machine,which can peel and thresh at same time.

Features of corn thresher:

First, put the four feet of the corn thresher on flat foot pads.

Second, feed it corn cobs continuously and evenly. The feeding quantity should be proper. Interrupted feeding may affect its productivity and too large feeding quantity may cause machine blocking or even damage the motor.

Third, check whether the power line link is fixed and install the ground electrode.

Fourth, before the work finishing, discharge all of the corn cobs and then make the machine halt with no-load.

Fifth, the corn cobs moisture rate should not be higher than 20%, or it also affects the operation effect.

The corn thresher is popular both in farm and factory after they harvest corn and it can thresh varies sizes corn.this corn machine has small size and movable,light weight,but high production yield.shelling clean with good kernels.the maize threshing machine can be driven by diesel or electric motor. it is the most popular hammer throwing type equipment which is the best sale in the market. the maize threshing machine shell the corn without breaking kernels.it is very suitable for home use or industry to process corns.

The main structure of the maize threshing machine has stander frame,feeding hole,rollers,discharging hole and so on.when maize goes into the machine,the rollers rotates,friction, Extrusion and propulsion to remove the kernels from the corn cob,because the roller is made of rubber, the kernels will not be broken,this type is just single threshing machine,do you want a combination corn peeler...