Bridge Crane in Single Girder Design with Capacity Up to 16t

Bridge Crane,LD type single girder overhead cranes,16t crane,crane with hoist

LD type single girder overhead cranes typically consist of a single girder construction. These can be built with steel beams or more rigid welding box girder type. Single Girder Cranes is more typical when lifting capacity less than 20T

LD type single girder overhead cranes construction features:

1- Lifting Mechanism

- Monorail wire rope hoist or chain hoist as option: -lifting speed: single or dual as per required

- Trolley Speed: Single or Dual or Step less as per required

- High performance with most economical price

2-End Carriages

-rigid welded box type end carriage

- Modula design

-cone squirrel cage motor or soft start motor as option

- Traveling speed: Single or Dual or Step less as per required

3-Main Girder

- Rigid welded box Girder or sturdy hollow steel section

- Modula design

- Made of steel Q235 or Q345

- Designed Deflection≤1/750 of span

4-Control

-independent pendent control travel along C-track

-or wireless control as option

-or cabin control as option

5-Electric Part

-Conductor power supply (as option)

-The control panels are IP54 or IP44 depends on working ambient.

-The components are positioned in a maintenance friendly way, and the whole layout provides with good protection

-Festoon cables are suspended on cable saddles, fixed to cable trolleys, running in a galvanized C-track.

-Main electric part in brand Schneider or Siemens

6-Painting

-corrosion protection through rust removal by mechanical shot blasting SA 2.5

-First layer of coating epoxy 30 microns

-Second layer of coating epoxy 30 microns

-Third Layer of coating of polyurethane 40 microns

-Average thickness: about 100 microns

-Color: yellow or Orange as per requirements

7-Safe Protection

-Emergency-off switch

-overload protect

-earth protection

-cross travel and long travel protection

-lifting travel protection

-Overheating protection of motor

LD...