Submitted by: Submitted by aravind2400
Views: 10
Words: 371
Pages: 2
Category: Other Topics
Date Submitted: 06/10/2016 11:04 PM
Need Answer Sheet of this Question paper, contact
aravind.banakar@gmail.com
www.mbacasestudyanswers.com
ARAVIND – 09901366442 – 09902787224
Industrial Safety Management
Multiple choices:
1. _____________is one of the weapons in the creative armoury available to mangers.
2. Which acid was the by-product of caustic soda manufacturing plant?
3. Which Step cannot be taken to isolate or block energy?
4. ____________are the outer particles of an atom they contain a negative charge.
5. This plan should provide for the orderly and phased shutdown of an installation.
6. MSDS stands for:-
a. Brainstorming
b. Hazard
c. Phosgene
d. Hazop
a. Folic acid
b. Hydrochloric acid
c. Sulphuric acid
d. Nitric acid
a. Block machine parts against motion that might result from gravity.
b. Disconnect or shutdown engines or motors that power mechanical systems.
c. Discharge capacitors by grounding.
d. De-energize electrical circuits by disconnecting power source from the circuit.
a. Electric current
b. Electricity
c. Electron
d. None of these
a. Off-site emergency plan
b. On-site emergency plan
c. Safety Plan
d. Health Plan
a. Material Safety Data Sheet
b. Medical Safety Data Sheet
c. Material Solution Data Sheet
d. Material Security Data Sheet
7. The Xanthate is dissolved in dilute sodium hydroxide & the resulting solution is the viscous orange liquid known as
a. Spinning
b. Shredding
c. Viscose
d. Aging
8. ____________is used as a temporary care measure to provide the circulation of some oxygenated blood to the brain.
a. CPR
b. ECC
c. NEC
d. CFR
9. The SWL of a wire rope can be calculated by dividing
Part Two
1. Describe the safety precautions in storing gas cylinders.
2. Write the advantages and disadvantages of „Electric Forks‟.
3. Explain the overview of the „Employer Safety Program‟?
4. What are the...