Xingbang the Mill Applications Cement Industry to Ease Cement Pressure

Submitted by: Submitted by

Views: 262

Words: 435

Pages: 2

Category: Business and Industry

Date Submitted: 09/13/2012 05:42 PM

Report This Essay

Xingbang the mill applications cement industry to ease cement pressure

the installation of the mill.Base hanging first gear into the pits, and attention to control good a certain height, and then the upper end of the plane "A" level of instrument calibration, while the transmission is installed on the surface of the "A" and bolted. 2.Host installation.Mat rubber shock pad before installation in the connection between the alicey599 base of the lower end plane with the cement foundation in contact and anchor bolts, and then a box-shaped level instrument calibration base "B" plane calibration points for cross crosshair four o'clock, at the same time adjusting to being two semi-linked

Impact Crusher:

Mobile Crusher

The shaft coupling "C", "D", the different shaft degrees shall be less than 0.20 mm, E1E2 not parallel shall not be greater than 0.1 mm, the "E1", "E2" of the gap should be maintained at 5-8 mm. 3.Plumbing fixtures,brick making machinejaw crusher location and height should be the total figure installation shall be arbitrarily changes and heightening between the coupling flange must be sealed with asbestos rope,cone crusher rubber or foam, and then stir into a paste, and then the white latex and talc conducted strictly sealed because the leak so as not to affect the production.Electrical equipment should be accurate and reliable, and subject to the various components installed test machine. Debugging.

brick making machine:

Empty load test machine running, roller device before the load test machine should be bandaged firmly with wire rope, to avoid the roller and grinding ring contact impact, then the host empty test machine running at least 1 hour; the host operation should be smooth,Jaw Crusher Box the body oil temperature must not exceed 80 C, shall not exceed 40 C temperature rise. 2.The...