Joyal Three-Ring Micro Powder Grinder

Three-ring Micro Powder Grinder is for super-fine grinding components with hardness lower than six in Moh's scale and humidity under 6 percent including kaolin, limestone, calcite, marble,talcum, barite, gypsum, dolomite, used mining equipment suppliers in south africabentonite mud,mica, pyrophyllite, sepiolite, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment and so on. The granularity on the finish goods is 325-2500 meshes (0.044-0.0055mm).

Working Principle Of Three-ring Micro Powder Grinder :

The leading bearing and each dial are driven by electromotor of primary tools via reducer, and numbers of rings and rolls that happen to be rolling within the ring channels are driven by dial by way of plunger. Right after staying crushed by hammer crusher, the massive products develop into little ones and they are sent towards the storage bin by elevator. The electromagnetic vibrating feeder sends them on the middle of first dial evenly; the elements will likely be driven on the edge of dial by centrifugal force, and fall into the ring channels and therefore are pressed, crushed and ground because of the grinding rings and rolls. Then the materials fall into the second and 3rd ring and crushed and ground. The substantial strain centrifugal blower inhales air in the outside and blow the components that are ground within the 3rd ring to powder Separator. The rotating turbo within the powder Separator helps make the coarse materials return to your mill and reground, while the fineness mixes together with the air and be drawn to the cyclone and be discharged from your discharging valve that's during the bottom of it. The air which mixed with very minimal fineness are purified by impulse dust catcher and discharged by blower and muffler.

Capabilities From the Three-ring Micro Powder Grinder in my business Shanghai Joyal Mining Machinery Co., Ltd.:

one. High-efficiency and reduced usage

With the very same end-products...