Test

Linksys SPA2102 Router Configuration Guide

Dear 8x8 Virtual Office Customer, This Linksys guide provides instructions on how to configure the Linksys SPA2102 as a router. You only need to configure your Linksys SPA2102 as a router if you have no separate router, wireless router, or combination broadband modem/router already in your network. If you already have a router or wireless router connected to your network, you do not need this guide. Just follow the setup instructions on pages 1-5 of the Linksys SPA2102 Installation Guide for Fax and Analog Phone Extensions at http://sims.8x8.com/GetDocument.aspx?docid=710514 If you do NOT have a router If you don’t have a router or wireless router connected to your network, please follow the instructions in this guide to configure your Linksys SPA2102 to work as a router. The guide that follows provides detailed instructions.

Network with Linksys Configured as a Router Please note that the router settings (and other network settings like PPPoE settings) to connect to your Internet service comes from your Internet Service Provider. These settings do not come from 8x8. If you do not know those settings, you may need to contact your Internet Service provider for more information.

Additional 8x8 documentation for using the Linksys SPA2102 with 8x8 service is available at: www.8x8.com/Support/BusinessSupport/Documentation.aspx

Phone Adapter with Router

Voice

User Guide

SPA2102

Model No.

Phone Adapter with Router

Copyright and Trademarks

Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or...