How to Maintain and Repair the Ball Mill

In fact, when using the machine, it should focus on the run-in period of maintenance, only through right use can the machine reduce operation problems or malfunction. Some notes for using the ball mill are as follows.

Users need to frequently check the oil, hydraulic oil, coolant, brake fluid and fuel oil bit and pay attention to check the machine sealing. At the same time, the lubrication of lubrication points should be strengthened, it is recommended that in the run-in period, each class must fill in lubrication run grease. Keep the machine clean and timely tighten the loose parts to prevent loosening and wear parts.

The run-in period of repose is forced to be taken good care of and we need to do a good job of checking swap and dealing with machines while paying attention to the exchange of oil. As cone crusher, the mill is a special vehicle by which the operating staff should receive training manufacturers, machine construction and performance. To fully understand the protection manual before operating the machine is necessary.

Note that in the workload of the run-in period which is generally not to exceed 80% of the rate. Deploy the appropriate amount of work to prevent the overheating of the machine to continue the operations for a long time. Pay attention to regular back each instrument, if it is abnormal, users should stop it in time to eliminate and find out the reasons and the fault. The job can not be started before eliminating the faults.

Vibrating screen : http://www.hxjq-crushers.com

high frequency vibrating ore screen : http://www.crusher-export.com/report/n119.htm