Introduction to Application of Hammer Crusher

Hammer crusher for crushing various mid-hard and abrasive materials weak. The compressive strength of the material does not exceed 100MPa, moisture content of less than 15%. Material to be broken coal, salt, chalk, plaster, brick, limestone and so on. Also for broken fiber structure, flexibility and toughness strong pieces of wood, paper, or broken asbestos cement waste to recycling asbestos fiber, and so on.Hammer crusher by the rotor, the body, regulating agencies and other major components. Motor through flexible pin coupling direct-drive cylindrical rotor. Rotor from the spindle, end plates, partitions, hammer pin, hammer and other major parts. Hammer hanging on the hammer pin, hammer pin mounted on the end plate and the diaphragm, side plates and separators with flat keys and nuts on the spindle.Upper and lower case by the crusher body, broken plates, sieve, pallets, back plate, lining and other major parts. Broken plates and sieve mounted on the pallet. Pallet supported on one end with the axis of the shaft seat on the chassis side, the other end is connected through the connecting plate and the adjusting mechanism. Liner installed in the chassis on both sides of the wall to protect the casing from wear and tear. Broken plates, plate, back plate and the rotor form a crushing chamber.Hammer crusher is rotors with hammer impact crusher, hammer not only with the rotor rotation, but also around the hammer pin rotation. Materials into the crusher, in the crushing chamber by high-speed rotation of the rotor ring with the impact hammer and broken, was broken material obtained from both the hammer kinetic energy, high-speed toward the broken plates, broken by the second, then fell on the sieve, by the hammer of the shear, extrusion, grinding and the materials and the material between the collision, the material can be further broken, and through the mesh from the plane. Debris can not be broken by the hammer to push the metal collector who, by the operator to...