Remote Instructions

The instruction for use

1. Function description

Remote control card is mainly programmed for English character input applications and will control the content input, the switch screen, the time setting, delete the specified page programs and all the pages program content depending on infrared remote sensor input. All programs that the infrared remote sensor edits, displays instantly with a retention time of 3 seconds. It displays only one program at a time.

LED control card parameter settings: First, You can set data polarity, OE polarity, wiring way, screen width, the screen height, and color type through the PC software included. After you finish the setting, and if the parameter is set correctly, the screen will display “No news”. Then, you can edit program using the infrared remote sensor

When the control card is running normally, only the “Power” and “Menu/ESC” is effective. When you enter the mode of editing program, other buttons are valid.

The “Power” button is used to switch screen on and off. (Push and hold 3 seconds)

The button of Menu/ESC is used to enter the editing program mode.

2. Menu operation

Pressing “Menu/ESC” will show “1.Edit”. You can choose the operation by pressing the “UP” or “DOWN” button. For example, if you press the “DOWN”, the screen will display “2.Set time”. Similarly press the “UP” button, the screen will display “4.Del Page”. If you want to some options for operation, press the “ENTER” button. If you want to quit, press the button “Menu/ESC”.

Menu button contains the following sub-menu:

1. Edit 2.Set time 3. Del all 4.Del page

3. Editing Program.

(1) Press the Menu button, the default displayed as "1. Edit", if you want to enter the next operation, press the button “ENTER”. The Screen will display “Page: 01”. If there is content in the page, The Screen will display “Page: 01*”. Of course, you can change the page number "01" through pressing the button of “UP” or...