The Operating Procedures of New Type Compulsory Concrete Mixer

Submitted by: Submitted by

Views: 10

Words: 354

Pages: 2

Category: English Composition

Date Submitted: 11/11/2015 12:02 AM

Report This Essay

What is the operating procedures of new type  compulsory concrete mixer ?Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:diesel cement mixers (for sale),concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. 1, starting the first inspection of the rotating part of the rotating part of the material cylinder and whether there is a scratch phenomenon diesel concrete mixer, such as scraping, should be adjusted in time. 2, the gearbox should be injected into the oil can be used, unloading worm wheel and sliding bearing should be injected into the oil. 3, clear the barrel complex material, barrel position limiting device lock, and then start the machine, such as after the start found the direction of operation does not meet the requirements, should be promptly cut off the power supply, will lead any two phase swap position, and then restart. 4, the concrete mixture into the cylinder, cylinder cover, according to the mixing time adjustment of the time relay timing (must be adjusted in case of a power failure). 5 mobile hollow concrete block making machine, press the start button, the spindle drives the stirring shovel operation, achieve the automatic parking time set. 6, unloading, the first stop, then the material body position limit by the handle release, and then rotate the hand wheel, driven by the worm wheel drive material tube to facilitate the location of the material, stop rotating, and then start the machine so that the main axis of the main shaft can be discharged material Ready-Mixed Concrete Making Plant, until the material discharge clean stop spindle running, rotating hand wheel to the material cylinder. 7, cleaning barrel, water into the barrel of the main shaft rotating barrel will clean the residual material or sand washing can also be. In the operation of...