You Know Production Technology of Asbestos Tile?

Asbestos cement tile is the use of asbestos fiber and cement as raw materials by the board of pressurized roof waterproof material, from the specifications will be divided into big wave, medium wave, wavelet three, in addition to, respectively, with the three tiles covered the roof with herringbone back.Asbestos shingle is characterized by a single area is large, the effective use of large area, also have fire prevention, moistureproof, anticorrosive heat-resistant, hardy, character such as light, and the manufacture is simple, low cost, wide application. But do you know the production technology of asbestos tile?

This asbestos tile production line mainly includes such equipment as raw material agitator, hatschek process machine, blank forming machine, blank connecting machine, molding machine, crimp machine, bead cutter and mold suction machine. This series of asbestos tile equipment is suitable for cement asbestos or magnesite materials to make medium or small-sized roofing sheet asbestos tile or magnesite tile cement.

Preparation and production methods of asbestos tile production line is as follows: (1) first of all, ready to all kinds of wave type iron float shall be watts model, plastic sheeting, and other tools and working platform.(2) thin moderate to dry the water in synthesis of cement and yellow sand ranks of cement mortar, the asbestos fiber filament flat out on the working platform of plastic sheeting, pour cement mortar in the above, use iron float, requires uniform thickness, average thickness control in the small wave around 5-6 mm, waveform around 6-6.5 mm, 8 mm big wave.Soak asbestos fiber cement mortar, compaction, then put the plastic cloth shop and mortar to waveform shaping curing mold. (3) according to the above method can produce continuous operation, according to each wave type mold, stacked 26 to 30 pieces have initial curing tile advisable, general use intensity about after a week or so can reach. (4) in the curing process,...