How to Monitor the Failure Faults of Operating Crushers

Ore production enterprises in the crusher production operations will often encounter a variety of crusher failures. These failures occurred because that the crusher in the process will use some small exceptions. If they are not timely detected it will results these problems which will lead to large-scale machine malfunction, finally the machine does not work. In the case of non-stop, fault monitoring, first we must understand crusher machine, such as cone crusher and rock crusher, in normal operation when the status of various operating parameters.

With the machine running, the normal state is based on some data but users also understand the abnormal characteristics and performance. Only for the understanding of these basic state , the machine will become aware of the abnormal. The combined use of these measures can ensure that the machine can work properly. Conditions are necessary to be detected and the amount of production will increase. When the crusher is running, the run-time of the machine is active.

Large shaking sound machine have loose screws, another example is that sometimes the internal components of the machine damage can lead to the decrease in the amount of production of the machine, also sometimes machine damage will lower the production pass rate. In order to continue to accumulate experience in the normal production process, users need always pay attention to these abnormal characteristics of the phenomenon crusher, these problems of machine maintenance machine can be timely detected. Monitoring of failure in the production process, without stopping the machine, the type of work in such preventive can greatly reduce production downtime, thereby greatly improve the production efficiency. Monitoring changes in the chemical composition of the oil solution can help fix the problems.

mobile stone crusher plant : http://www.hxjqcrusher.com/135.htm

drying equipment : http://www.china-crusher.com/sawdust-dryer.html

mobile quarry...