Cont

Continuum Site Verification Checklist

Continuum Security Site Verification Checklist

5/31/2011 1:15 PM

Continuum Site Verification Checklist Instructions

The purpose of this verification checklist is to provide documentation to the Project Manager that the Site Engineer has confirmed the Continuum Security configuration covered in this document. The first section provides step by step instructions for novice users. The second section is the actual checklist where each task should be initialed by the Site Engineer, and the whole document signed by the Site Engineer and the Project Manager. To print the Checklist section of this procedure, start printing on page 21.

NOTE: This document is not intended to be a troubleshooting guide. For additional support in any area of concern, please utilize the following references: Continuum software Compatibility matrix http://extranet.tac.com/Content?contentId=document/12362&node=5836 Continuum video compatibility matrix http://extranet.tac.com/Navigate?node=12761 Lessons Learned site for general FAQ’s http://208.69.45.150/pub/Lessons/UserHome.php Continuum documentation and technical bulletins http://extranet.tac.com/Navigate?node=5992

Page 2 of 20

Continuum Site Verification Checklist Instructions Basics

1. Has one of the workstations been selected as the Primary Access Server (select Primary Access Server in the Workstations General Tab). Access the Workstations General tab using Continuum Explorer, right click on the Workstation and select Edit.

2. Has one of the workstations been selected as the Secondary Access Server (select Secondary Access Server in the Workstations General Tab).

3. Do both the Primary and Secondary Access Server Workstations have Auto Download selected (to automatically download schedules)?

Page 3 of 20

Continuum Site Verification Checklist Instructions

4. Are all Access Controllers, NetControllers, IOU Modules and Infinet Devices Online, as reported in their...