What About Working Process of Spiral Chute Classifier

Spiral chute separator used for by setting the downward spiral chute to separate ore, ore plaster along the spiral chute flows downward. Spiral chute separator can see as a spiral chute separator. Straight chute to one thousand have been used for recycling high density from the mud ore, one of the most famous is gold. Records show that in the end of the 19th century has invented the spiral separator, such as see US629595. When mud flows down the spiral chute, it affected by centrifugal force and gravity. Heavy minerals (high density) the particles toward the slot, the internal accumulation of the lighter minerals (low density particles) tend to be outside of the slot. But are u familiar with the working process of spiral chute sepparator?

Spiral chute separator, which is one kind of classifiers, has such advantages as simple structure, no moving parts, light weight, no noise, easy installation configuration, and maintenance, etc. The application of spiral chute separator is as follows: When the pulp flow carving near the edge of groove, spiral will be generated; Seam will be at the same time, it strengthened the loose layered effect and thick but light mineral separation from centered with cross slot thickening move outward. At the bottom of the heavy mineral flows along the inside edge groove guide. As a result, the quality of the ore quantity is reduced, and the concentrations of the metal recovery.

IN addition, the working process of spiral chute separator, which is one kind of classifiers, is as follows:

Erect gravity spiral chute, correct vertical line, and in the right place with metal or wood gravity spiral chute. Then, send the ore of sand pump screw at the top of the mouth.Add additional water, ore OARS to concentration, ore OARS will rotational flow from top to bottom.In the process of flow, it will produce an inertial centrifugal force.Because of the ore, ore and different proportion of sand, size and shape, the effect of gravity and...