Detailed Introduction to the Structure of Sawdust Dryer

Sawdust dryer, which mainly consists of air boiler、feeder、pneumatic dry pipe、cyclone separator and draught fan, uses screw conveyer to bring the powdery and granular wet saw dust into the dry pipe continuously. It is a process of getting powdery and granular dry products through evaporating water from the wet materials when transport and scatter the high speed hot air flow. The sawdust dryer means to continuously feed wet sawdust powder into dry tubes with screw conveyor. Evaporate wet material moisture in the transmission and spread of high-speed hot air flow, getting dry powdered or granular product. Sawdust dryer machine is mainly composed of air heater, air feeder, air drying tube, cyclone separator, blower and other components.Sawdust dryer structure:1) Sawdust Dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring.2) Sawdust Dryer is mainly composed of shell, back and forth supporting wheel, feeding and discharging unit and gear cap. The accessories which are not in the the scope of this machine include firebox, feeding and discharging equipment, dust catcher, etc.Due to the above structure, the saw dust can be fully dried through the rotary dryer, and the saw dust should be fully scattered again when taken into the material conveying pipe so that it can evaporate the water fast. The baffle blocks the impurities in the saw dust to assure the quality of the saw dust taken into the material conveying pipe. Blowpipe and rotary dryer dry the sawdust inside the dryer, materials become boiling and fluidifying and fully contact with the hot air, this is the drying process. The utility model sawdust dryer is easy to use with a simple structure.quartz sand dryer manufacturer: http://www.china-ftm.com/pros/quartz_sand_drying_machine.html