Check Concrete Batching Plant Before Using

a. Check the connection of null lines of power supply, tighten all wire ends, no looseness, no charged conductor exposed. b. Check the gearing, keep the main bolts of mixing gearing (supporting bolt, bolt for arm and blade cement mixer for sale, lining plate bolt, bolt for arm and shaft, etc.) tight. c. Check the mixing drum, if has foreign body, please clear it to prevent blocking d. Check the lubrication parts, reduction gearbox, open gear, shaft end seal should have enough lubricating oil

Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:JZR500DS diesel mobile mixer,mini concrete mixer,Twin shaft concrete mixer,etc. We will provide you with the best product and service.

e. Check the water, keep the water clean. f. After checking all of the above terms, if it is ok, please start the machine without loads, check if the direction of rotation of the mixing shaft is right mobile concrete mixing batch plant, if it is not right, please correct the position of the connecting wire. g. Before using mobile diesel concrete mixer, check if the motor pump with high concentrations of oil has lubrication oil. Start up oil pump, supply high concentration oil to the sealing point of the shaft ends until oil overflows between mixing shaft and cracks of the inner wall of mixing shaft.

h. Check the oil- level height of air compressor, please use 13 # compressor lubricating oil in winter and 19# lubricating oil in summer(or refer to the air compressor operation instruction.) i. In freezing season or long storage, before using, please check if the systems with water and additive have oil leakage, j. Check the water accumulated in the water filler of the pneumatic system. if water is surplus, please Open the manual valve to drain away water. Check the oil level in the oil mist, if oil level is too low, please add...