Feeding Control Realization of Raymond Mill

The feeding control of Raymond mill is very important, which concerned with the grinding efficiency and the quality of flour particle size. Then we will introduce methods of feeder’s control and automatic feeding.

Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:JZR series diesel concrete cement mixers,ready mixed concrete batching plant,Stationary concrete batching plants,etc. We will provide you with the best product and service.

Grinding machine vibration feeder uses electromagnetic feeding mode, and electric vibrator is a dual particle orientation forced vibration system. It consists of tank, the coupling fork and the armature. Entire electric vibrator feeder should be hanged in a free state and there should be a gap of around swimming without touching the materials and the feeder to avoid noise at work. After installation, the screws which used for the connection and locating the fork during verification should be loosened (there are three screws on the top and one on the bottom) JS series concrete mixer, which will loosen the lock nut tightened. Open the cover of the vibrator, and check whether the gap of core and armature is in the range of 1.8 ~ 2.1m Concrete Pan Mixer, and are they parallel and clean, then check all the screw. Especially pressing iron armature screws and a plate spring, everything is normal and then covers the back.

Powered and no-load test mobile hallow brick making machine, adjust potentiometer and increase slowly and gradually by a small amplitude adjustment. Observe the change condition of amplitude and current, the amplitude is 1.75-7%; the current is 0.6 ~ 2.5, then check whether the amplitude of the current is stable after 1h working continuously, each part without loosening the screws. Under all normal circumstances, open the gates for material transport silo...