Reasons for the Mixing Shaft to Stop Rotating or Rotating Slowly

Performance as the mixing shaft to stop rotating or rotating slowly. The reason is:Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:Cement Silo,concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. (1) severe overloading. If the mixing shaft exceeds the normal working load, it will rotate slowly, if the load is too large, it will cause the mixing shaft to stop. If the overload caused by the mixing shaft to stop concrete batching plant, it is necessary to adjust the feed quantity, unload the excess material, reduce the mixing shaft rotation load, so that the normal operation. (2) there is a large foreign body between the mixing blades or the side blades and the inner wall of the tank. Mixing blades or side blades and the inner wall of the tank has a larger foreign body can also cause the stirring shaft to stop Planetary Concrete Mixers for sale, the reason why the foreign body can be stuck, is due to the large gap between the blade or the side of the tank and the tank. When the foreign body is stuck in the mixing shaft, the friction sound of the shaft is often sharp, and when the failure occurs low cost concrete batching plant, it is necessary to stop the machine immediately. (3) the motor belt is too loose. If the motor belt is too loose, will lead to the transmission of power shortage, even if the smaller load may cause the stirring shaft to stop. If the belt is too loose to cause the mixing shaft to stop, then the need to stop, and then adjust the tension device, tighten the belt.