Submitted by: Submitted by Zeus7g
Views: 343
Words: 429
Pages: 2
Category: Science and Technology
Date Submitted: 01/26/2013 05:25 PM
Week 5 Assignment Worksheet
Fill in, answer, and/or complete the exercises below. Put your answers in RED font in the places provided. The work assignments on these pages are pulled from your Exploration Labs and Study Guide text. Refer to the discussions that accompany the assignments as needed.
Place this worksheet in the Wk5 Assignment dropbox. When placing in the drop box, be sure to title the assignment, (ie: First Initial_Last Name_Week1_Assignment 5).
Chapter 5: STP
Page 196: STP Convergence
Complete Figure 5-2 Determine the Root Bridge and Port Roles: Topology 1
The Tree is as follows
SWA – SWD – SWC
SWA - SWB
Complete Figure 5-3 Determine the Root Bridge and Port Roles: Topology 2
The Tree is as follows
SWB – SWC – SWD
SWB - SWA
Complete Figure 5-4 Determine the Root Bridge and Port Roles: Topology 3
The Tree is as follows
SWD – SWA – SWA
SWD - SWC
Complete Figure 5-5 Spanning-Tree Recalculation Exercise
The Tree is as follows
SWB – SWA – SWD - SWC
Page 203: RSTP Concepts Exercise
Complete Table 5-4 comparison of 802.1D and RSTP
Operational Port State 802.1D Port State RSTP Port State
Enabled Blocking Discarding
Enabled Listening Discarding
Enabled Learning Learning
Enabled Forwarding Forwarding
Disabled Disabled Discarding
Page 205: Command Reference
Complete Table 5-5 Commands for STP Configuration
spanning-tree cost 110Switch#show spanning-tree | Changes the STP port cost to 110 |
Switch#show spanning-tree | Displays the STP port and path cost to the root bridge |
Switch(config)#spanning-tree
vlan 1 root primary | Configures the local switch as the primary root bridge
for VLAN 1 |
Switch(config)#spanning-tree
vlan 1 root secondary | Configures the local switch as the backup root bridge
for VLAN 1 |
Switch(config)#spanning-tree
vlan 1 priority 24576 | Configures the local switch with 24576 as the STP
priority for VLAN 1 |
Switch(config-if)#spanning-tree...