How to Operate Road Sweeper in the Rain ?

Extra rain this year, the reporter cell door where flooding has occurred less than 10 times, far beyond the level of previous years. Each adventure will road sweeper times more that I do not know the depth of the pond, on the minds meditation: Do not turn off, do not turn off! Fortunately road sweeper fairly disappointing, the bottom muddy wading smoothly. But, after all, not for swimming road sweeper designed, will inevitably lead to problems down several times, the reporter summed up the first aid after wading and precautions for driver information.

Then turn off the ignition if you encounter wading water, do not take risks. As a last resort to wade, to maintain twelve block, do not high gear low speed, to breath through. If because of the water caused by excessive flame, immediately turn off the ignition switch, do not attempt to start the engine again, the road sweeper to a safe place, try to make the road sweeper from high to low, it will give into the exhaust pipe of the water out, avoid damaging the catalytic converter and muffler. Engine inlet delay treatment after judgment, if water enters inside the engine, remove the spark plug should be artificially cut off the fuel supply system and ignition system with motor running engine, so that the water inside the engine smooth discharge. Also check the fluid status of various systems road sweeper, there frothing, turbidity and other phenomena should be promptly replaced. After testing the application internally compressed air to clean the engine compartment electrical connecting parts, to prevent moisture accumulation in the electrical joints caused by corrosion. Focus position is clear: the fuse box, the sensor plugs, body water accumulating at. After cleaning, carry road sweeper road test to determine the engine during driving without abnormal noise. If significant driving noise, check the engine bearings and rotating parts. After draining the water compartment, if not timely wading into the water inside,...